TracVision M3/M2 User's Guide
Chapter 2 - Operation
Turning the System On/Off
Turning On the System
Turning Off the System
12
Since the interface box supplies power to the antenna, you can turn the
antenna on or off using the interface box POWER switch.
Follow the steps below to turn on your TracVision system.
1. Make sure the antenna has a clear view of the sky.
2. Turn on your satellite TV receiver and TV.
3. Press the POWER switch on the front of the
TracVision interface box.
Figure 7 Interface Box Components
Power
Status
Switch
Lights
4. Wait one minute for system startup.
Once the antenna finds the correct satellite, all three status lights on
the interface box should be lit green. If any lights are not lit green, refer
to
"System Status Lights" on page
Follow the steps below to turn off the TracVision system.
1. Press the POWER switch on the front of the
TracVision interface box.
2. Turn off your satellite TV receiver and TV.
Display
Buttons
40.