Selecting Satellites To Track - KVH Industries Cars 2 Innotab User Manual

Selecting Satellites to Track

Follow the steps below to set up the TracVision system to track the
satellites of your choice.
NOTE: If the status screen does not show "System Needs Setup," follow the
steps in "Resetting the System to Change Setup" on page
1. Press any button to begin the setup process.
2. The display shows "LAT/LONG." Press
Now you need to enter your vessel's latitude and longitude so
that the antenna can calculate the proper LNB skew setting for
your position. The antenna will also use this position
information to speed up satellite acquisition.
ASTRA1
SYSTEM NEEDS SETUP
LAT/LONG= 41N, 071W?
CHANGE
LAT/LONG= 41N, 071W
CHANGE
TracVision M3/M2 User's Guide
ACCEPT
CHANGE.
ACCEPT
Chapter 4 - Setup
34.
27