Seat Belts; Tire Pressure Monitoring (Warning) System - Toyota Sienna 2014 Quick Reference Manual

SAFETY AND EMERGENCY FEATURES

Seat belts

If belt is fully extended, then retracted even slightly, it cannot be re-extended
beyond that point, unless fully retracted again. This feature is used to help hold
child restraint systems securely.
To find more information about seat belts, and how to install a child restraint
system, refer to the Owner's Manual.
Tire Pressure Monitoring (warning)
System
After adjusting tire pressures, or after tires have been rotated or replaced, turn
the ignition switch to "ON" and press and hold the "
blinks three times. Let the vehicle sit for a few minutes to allow initialization to
complete.
Refer to the load label on the door jamb or the Owner's Manual for tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes
in tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the
light.
Keep as low on
hips as possible
System reset initialization
1. Push and hold "
until the indicator blinks three
times.
2. Wait a few minutes to allow
initialization to complete.
34
Take up slack
Too high
SET" button
SET" button until indicator