Download Print this page
Toyota Prius 2014 Quick Start Manual
Hide thumbs Also See for Prius 2014:

Advertisement

Quick Links

T-SB-0158-13
2014 Prius Pre-Delivery Service (PDS)
Service
General
Category
Pre-Delivery Service
Section
Applicability
YEAR(S)
2014
Introduction
Pre-Delivery Service (PDS) is a critical step in satisfying your new car customers. Customer
feedback indicates the following areas deserve special attention when performing PDS:
• Careful inspection for paint chips/scratches and body dents/dings.
• Proper operation of electrical accessories (including interior light, clock, and radio reset).
• Interior cleanliness.
• Proper function of mechanical systems.
Customer retention and proper maintenance of vehicles has been a major focus for Toyota. To help
remind customers that regular oil changes are essential to the proper maintenance of their vehicle,
dealers are required to begin installing a first oil change reminder sticker prior to delivery. By doing
this, customers will be reminded to return to your dealership for their first oil change. Your current
oil change reminder sticker may be used. (See PDS Check Sheet item 8 of "Final Inspection &
Cleaning.")
A New PDS
have been added, expanded or clarified. Bulletins are available for items in bold type.
October 16, 2013
MODEL(S)
Prius
Check Sheet
has been developed for the 2014 model year Prius. Some check points
© 2013 Toyota Motor Sales, USA
USA
Market
ADDITIONAL INFORMATION
Page 1 of 7

Advertisement

loading

Summary of Contents for Toyota Prius 2014

  • Page 1 • Interior cleanliness. • Proper function of mechanical systems. Customer retention and proper maintenance of vehicles has been a major focus for Toyota. To help remind customers that regular oil changes are essential to the proper maintenance of their vehicle, dealers are required to begin installing a first oil change reminder sticker prior to delivery.
  • Page 2 TMS and/or Region/Distributor audit, the PDS payment amount will be subject to debit. An additional Repair Order completed in conjunction with normal PDS must have time punch/flags for service. If multiple repairs are performed, separate time flags must be punched for each repair. © 2013 Toyota Motor Sales, USA...
  • Page 3 7. Check audio/navigation*/backup camera* systems and set clock For navigation, set the destination search area to local position. 8. Verify Entune/Navigation software version (Display Audio, Non-HDD Type only)* – T-SB-0026-12 9. Check multi-information display and trip information on center display* © 2013 Toyota Motor Sales, USA...
  • Page 4 Refer to Service Bulletin No. PG001-06, “Battery Maintenance for In-Stock Vehicles & Pre-Delivery.” NOTE Battery SOC should be a minimum of 75%. Please enter the SOC Reading on the space provided on the check sheet and attach the printout to the check sheet. © 2013 Toyota Motor Sales, USA...
  • Page 5 7. Inspect under the vehicle for damage, rust etc. 8. Visually check bolts and nuts on chassis and powertrain for looseness 9. Install rubber body plugs (stored in glove box or console)* 10. Check hybrid transaxle fluid © 2013 Toyota Motor Sales, USA...
  • Page 6 8. Inspect for squeaks and rattles 9. Check heater and A/C* operation 10. Check cruise control operation* Check cruise control, including On-Off switch, “SET/COAST,” “RESUME/ACCEL,” and “CANCEL” functions. 11. Check front seat heater operation* © 2013 Toyota Motor Sales, USA...
  • Page 7 Perform Health Check to ensure that diagnostic trouble codes are not present. Health Check results can be printed for the customer at delivery, or for the dealer file, using the Diagnostic Report function. * Inspect or install when equipped or required © 2013 Toyota Motor Sales, USA...