Stabilizer Adjustment - Smooth Fitness 6.25E User Manual

How to level the treadmill:
An uneven floor or improper stabilizer level can cause the treadmill to wobble during use as well as the incline adjustment
to function incorrectly. Please follow the procedure described below to make sure the treadmill stabilizer is adjusted
correctly prior to use. You may need the assistance of another person to perform this adjustment.
1. There are four stabilizers and two
cushions located on the underside of
the treadmill as shown in drawing 1.
These all need to sit firmly on the
floor to prevent the treadmill from
wobbling during use.
2. Inspect each side of the treadmill
base frame. The treadmill should sit
on the floor with all four stabilizers
and both cushions resting firmly on
the floor as shown in drawing 2.
Shake the handlebars back and forth
to check if they are resting firmly on
the floor. If they are not, tilt the
treadmill to one side to adjust the
stabilizers as shown in drawing 3.
Simply turn the stabilizers like a
screw to adjust their heights. Repeat
this until the treadmill sits firmly on
the floor.
20
SMOOTH 6.25E MOTORIZED TREADMILL

STABILIZER ADJUSTMENT

1. Four stabilizers towards the rear and two cushions at the front.
2. Check position of stabilizers and cushions.
3. Tilt treadmill to access stabilizers.
www.smoothfitness.co.uk