6.2 MaKiNG 3-WaY iNTercOM calls
To start an Intercom Conference Call with Channel "A" and "B":
OPTiON 1: Voice connect (VOX)
1. S peak any word loudly into the microphone to open the
Intercom channel.
2. W hen you hear the Voice Command tone, say
to make an intercom call with Rider A and Rider B.
☛
OPTiON 2: Manual Mode
1. Add Channel "A": Tap the channel "a" Button
2. Add Channel "B": Tap the channel "B" Button
If you are already in an Intercom Call with Rider A or B, you can add
another rider (A or B) by tapping the respective button, or another
rider can join the intercom call in the same way.
To end Intercom Call press the respective Channel "A" or "B" Button.
NOTe: 3 and 4-way intercom calls can only be made using Channel
"A" and Channel "B".
6.3 MaKiNG 4-WaY iNTercOM calls
Once you have successfully paired the four G9s as described in
5.2c. proceed as follows:
1. Make sure all four G9s are in Standby mode.
2. P assenger 2 should tap Button "B" to initiate an Intercom call
with Passenger 4. Wait until audio is heard on both G9s.
3. R ider 1 should tap Button "A" to initiate an Intercom call with
Passenger 2.
4. R ider 3 should tap Button "A" to initiate an Intercom call with
Passenger 4.
|
|
scala rider
scala rider
G9 / G9 PowerSet
G9 / G9 PowerSet
®
®
18
18
Now the 4-way Intercom conference mode is established.
"Call Intercom"
:
6.4 UsiNG CLICK-TO-LINK iNTercOM
Make
Click-to-Link
calls
receive
Click-to-Link
calls
If other scala rider users are nearby, your next Click-to-Link call
may randomly connect to any of them.
if you want to...
Perform this action:
Start a Click-to-Link call
Double tap the Channel"A"
request
Button
(search lasts up to 10
seconds)
End a Click-to-Link call /
Tap the Channel "A" Button
Cancel a Click-to-Link call
request
Accept a Click-to-Link call
When hearing the
Click-to-Link ringtone:
Tap the Channel "A" Button
or Speak any word loudly
to answer by VOX
Reject a Click-to-Link call
While hearing the
Click-to-Link ringtone:
Remain silent until the ring
tone stops