Programming Filter Monitor; Checking Filter Monitor; Resetting Filter Monitor - Robertshaw 9710 User Manual

PROGRAMMING

Programming Filter Monitor

The filter monitor keeps track of the total time the system fan has been in operation during the heating or cooling modes.
The "Check Filter" message appears when the hours of fan operation equals your programmed filter monitor hours setting.
1. Press SET and FILTER buttons at the same time. Release both
buttons.The display will show:
2. Press ∨ or ∧ button to change filter hours setting (between 0 to
960 in 60 hour increments). The default is 240 hours (based on
average 30 day month at 8 hours per day fan operation). A setting
of 0 hours disables this feature.
3. Press SET button to save setting.

Checking Filter Monitor

1. Press FILTER button. The current hours of fan operation since
last reset are shown for reference.
2. The main display will return after a few seconds.

Resetting Filter Monitor

1. When filter needs to be serviced, "Check Filter" will show in main
display indicating that the hours of fan operation have met your
programmed filter servicing interval.
2. After servicing the filter, repeat steps 1-3 to reset/reprogram your
filter monitor.
7 . Press SET button. The display will show AUTO with FAN.
8. Press either ∨ or ∧ button to adjust the fan setting to be in
AUTO (fan controlled by system when required for heating or
cooling) or ON (fan remains on continuously) for the individual
daily setpoint you are programming.
9. Press SET button.
10. Repeat steps 3-9 for the remaining DAY, EVE, and NIGHT settings.
11. Press SYSTEM button for opposite program (HEAT or COOL).
12. Press SET button and repeat above steps for opposite program.
NOTE: Program changes made to setpoint times, temperatures, or fan
operation are not saved in memory unless you finish the operation by
pressing the SET button after each entry as shown above.
NOTE: When programming opposite season, remember that both
programs use the same time and programmable fan settings.
PROGRAMMING
SET
CHECK
FILTER
FILTER
SET
FILTER
MON
SET
MON
SET
SYSTEM
MON
SET
22
MORN
AUTO FAN
MORN
FAN ON
MORN
FAN ON
19