Oki C9800hdtn Configuration Manual page 68

4
4-16 Performing Setup from the Control Panel
Delete Filter
Yes/No [No]
This option allows you to delete IP addresses individually or by range.
Edit Filter
Yes/No [No]
This option allows you to make changes to IP addresses or a range of IP addresses to be
permitted or rejected.
If you selected Yes to enable IP filtering, these options appear. Add, delete, and edit fil-
ters as required. To add filters, enter the IP address, IP range, and accept the
filter policy.
IP Port Setup. All ports not listed in the following setup options are closed. Sup-
ported protocols are listed in parenthesis after the port number.
Configure IP Ports
Yes/No [Yes]
Select Yes to proceed to the subsequent IP Port settings.
20-21 (FTP)
Enabled/Disabled [Enabled]
Select Enable to enable the 20-21 (FTP) ports.
23 (Telnet)
Enabled/Disabled [Enabled]
Select Enable to enable the 23 (Telnet) port.
80 (HTTP)
Enabled/Disabled [Enabled]
Select Enable to enable the 80 (HTTP) port. (Fiery WebTools and IPP printing)
137-139 (NetBIOS)
Enabled/Disabled [Enabled]
Select Enable to enable the 137-139 (NetBIOS) ports. (SMB printing)