Configuring A Netware Server For Printing With Ndps - Oki C9800hdtn Configuration Manual

2
2-15 Fiery on a NetWare network with NDPS

Configuring a NetWare server for printing with NDPS

Before you begin
The following procedure assumes NDPS has been installed during NetWare 5.x or
later installation and that a Broker is running on the server. Unless you have manually
unloaded the Broker, it loads and runs when you install NDPS. Make sure you are
using the latest NetWare service pack and Novell gateway. Finally, create an NDPS
Manager. For more information, see your NetWare documentation.
In Fiery Setup, make sure you have enabled TCP/IP and LPD printing on the Fiery.
You can ping the Fiery to verify that TCP/IP communication is successful.
Setting up the Fiery printer driver
You first need to create a directory for Windows NT 4.0/2000/XP/Server 2003 or a
folder for Windows 98/Me in the NetWare server for NDPS to install the
corresponding printer driver files from the User Software CD.
T
O SET UP THE PRINTER DRIVER FOR
1. Log on to the Novell file server as a superuser or Administrator.
2. Create a directory called Fiery in the following location:
SYS:ndps\resdir\Prndrv\NT4 for Windows NT 4.0
SYS:ndps\resdir\Prndrv\2000 for Windows 2000
SYS:ndps\resdir\Prndrv\XP for Windows XP
SYS:ndps\resdir\Prndrv\Server 2003 for Windows Server 2003
3. From the C9800 Driver CD, copy the contents of the following folder to the Fiery
directory:
DRIVERS\ENGLISH\NT40\PS for Windows NT 4.0
DRIVERS\ENGLISH\WIN2K_XP\PS for Windows 2000
DRIVERS\ENGLISH\WIN2K_XP\PS for Windows XP and Windows Server 2003"
W NT 4.0/2000/S
INDOWS
2003
ERVER