Setting for the number of times of reading
coincidence
When reading result coincides the number of times you have set, the reading result is
output to the RS-232C interface.
The verification system is AND verification (Continuous coincidence system). (This
cannot be changed.)
Reading once and verification zero times
Reading twice and verification once (Factory default setting)
Reading three times and verification twice
Reading four times and verification three times
Reading five times and verification four times
Reading six times and verification five times
Menu sheet
_X0_
_X1_
_X2_
_X3_
_BS_
_BT_
Section 4
Setting Method
Command
X0
X1
X2
X3
BS
BT
V500-R2 series
69
User's Manual