Collective Setting - Omron V500-R2 Series User Manual

Section 4
Setting Method

Collective setting

Collective setting of conditions appropriate for connection of programmable controller
(EDB) and for connection of multi-drop using link unit (EDA) is allowed.
Setting of programmable controller connection
Hatching parts are the changed point from the factory default setting.
Collective setting
Types of code, which is possible to
read
Number of reading digits
Detail
condition
Reading
condition
Communication
condition
LED illumination
Buzzer sound
Buzzer sound volume
Buzzer frequency
External trigger signal
READ OK/NG signal output
READ OK/NG signal output system
V500-R2 series
60
User's Manual
Menu sheet
_EDB_
Item
EAN/UPC, CODE39, Codabar (NW-7), Industrial2of5(STF), ITF
No designated number of digits
CODE39 detail setting Invalid C/D of CODE39
Transfer C/D of CODE39
Transfer ST/SP of CODE39
Codabar (NW-7) detail Invalid C/D of Codabar (NW-7)
setting
Transfer C/D of Codabar (NW-7)
Transfer ST/SP of Codabar (NW-7) (abcd/abcd)
ITF/ Invalid C/D of ITF/Industrial2of5(STF)
Industrial2of5(STF)
Transfer C/D of ITF/Industrial2of5(STF)
detail setting
Reading system Trigger reading
Reading operation Single reading
Reading valid time Trigger + 2 sec.
Number of reading Twice (Verification: once)
coincidence
Communication speed 9600 bps
Data length 7-bit
Parity Even number
Stop bit length 2-bit
Header None
Footer CR
Transfer number of digits Not transferred
RS/CS control None
CS waiting time Infinity
Communication No protocol system
protocol
Process when reading is NG Transfer ? (CR), > (CR)
LED illumination time after decoding is 200 ms.
Buzzer sound duration after decoding is 200 ms.
Max.
3 kHz, 2 kHz
Negative logic (L active)
Output
Trigger synchronous system, positive logic (H active)
Command
[EDB
Setting content