Enabling/Disabling Ddc/Ci Communication; Setting Eizo Logo Display On/Off; Resuming The Default Setting [Reset]; To Reset Color Adjustment Values - Eizo FlexScan S1923 User Manual

2-14 Enabling/Disabling DDC/CI
communication
This function allows you to enable/disable the DDC/CI communication.
(1) Press to turn off the monitor.
(2) Press holding
The Enable/Disable setting is toggled by performing the operation in step 2.
2-15 Setting EIZO logo display ON/OFF
The EIZO logo appears on the display when turning on the monitor. This
function allows you to display, or not, the EIZO logo.
(1) Press to turn off the monitor.
(2) Press holding
The EIZO logo display setting is toggled by performing the operation in step 2.
2-16 Resuming the Default Setting [Reset]
There are two types of Reset. One is to reset the color adjustment only to the
default settings, and the other is to reset all the settings to the default settings.
●
To reset color adjustment values
Only the adjustment values in the current FineContrast mode will revert to the
default settings (factory settings).
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Reset> from the <Color> menu and press
(3) Select "Reset" with
The color adjustment values revert to the default settings.
●
To reset all adjustments to the factory default settings
Reset all adjustments to the factory default settings.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Reset> from the <Others> menu, and press
(3) Select "Reset" with
All setting values revert to the default settings.
22
Chapter 2 Settings and Adjustments
down to turn on the monitor.
down to turn on the monitor.
or , and press .
or , and press .
• You can check the DDC/CI setting in
• After resetting, you cannot undo the
.
.
• For default settings, refer to
.
.
NOTE
the <Information> menu.
Attention
operation.
NOTE
default settings (factory settings)"
(page 29).
"Main