Turning Off The Monitor Automatically [Eco Timer]; Setting Adjustment Menu Position [Menu Position]; Setting Power Indicator On/Off [Power Indicator]; Displaying Monitor Information [Information] - Eizo FlexScan S1923 User Manual

2-6 Turning off the monitor automatically
[Eco Timer]
This function allows you to switch the setting to turn off the monitor
automatically after a specified time has passed in the power saving mode.
Adjustable range: Disable, Enable (0, 1, 2, 3, 5, 10, 15, 20, 25, 30, 45 min,
1-5h)
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Eco Timer> from the <Others> menu, and press
The <Eco Timer> menu appears.
(3) Select "Enable" or "Disable" with
When selecting "Enable", set a monitor Off time with
(4) Press .
The setting is completed.
2-7 Setting Adjustment Menu Position
[Menu Position]
Adjust the menu position using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Menu Position> from the <Others> menu, and press
The <Menu Position> menu appears.
(3) Select a menu position with
The setting is completed.
2-8 Setting Power Indicator ON/OFF
[Power Indicator]
This function allows you to set the power indicator (blue) ON/OFF in the
monitor ON condition.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Power Indicator> from the <Others> menu, and press
The <Power Indicator> menu appears.
(3) Select "Enable" or "Disable" with
The setting is completed.
2-9 Displaying Monitor Information
[Information]
This function allows you to display the input signal status, current resolution
and model name.
Information 1/3 : Input signal status, resolution and H/V frequency
Information 2/3 : Enable/Disable setting for DDC/CI, On/Off setting for
SoG (Sync-on-Green)
Information 3/3 : Model name, serial number and usage time
(1) Choose <Information> from the Adjustment menu, and press
The <Information> menu appears.
(2) Then, press to check settings, etc.
20
Chapter 2 Settings and Adjustments
or .
or , and press .
or , and press
.
.
or .
.
.
.
.
.
NOTE
• The usage time is not always "0"
when you purchase the monitor due
to factory inspection.
.