To Set/Adjust Color - Eizo FlexScan S1923 User Manual

Menu Description
Brightness To adjust the full screen
brightness as desired
NOTE
• Values shown in percentage are available only as reference.
• You can also adjust the brightness by pressing
button while the adjustment menu is not displayed. Press
after adjustment.
• If you feel that the image is too dark even if the brightness is
set to 100%, adjust the contrast.
Contrast
To adjust the contrast of the
image
NOTE
• Values shown in percentage are available only as reference.
• In the contrast of 50%, every color gradation is displayed.
• When adjusting the monitor, it is recommended to perform
the brightness adjustment which may not lose the gradation
characteristics, prior to the contrast adjustment.
• Perform the contrast adjustment in the following cases.
– When you feel the image is too dark even if the brightness
is set to 100% (Set the contrast to higher than 50%.)
Temperature To select a color
temperature
NOTE
• Setting the value to "Off" presents the natural color of the
panel.
• The values shown in the Kelvin (K) are available only as
reference.
Gain To adjust red, green, and
blue to a desired color tone
respectively
Attention
• This function does not enable to display every color gradation.
NOTE
• Values shown in percentage are available only as reference.
• When using the <Gain> setting, the <Temperature> setting is
set to "Off".
• The gain value may change depending on the value of the
color temperature.
Reset To reset the color settings of the selected FineContrast mode to
the default settings
●
To set/adjust color
(1) Choose <Color> from the Adjustment menu, and press
(2) Select a desired function from the <Color> menu, and press
The selected function menu appears.
(3) Adjust the selected item with
The adjustment is completed.
Adjustment range
0 to 100%
0 to 100%
Off, 5000K, 6500K, 9300K
0 to 100%
Adjust the respective brightness of
red/green/blue to make a desired
color tone. Display an image with
white or gray background for
adjustment.
.
or , and press .
NOTE
• Using the "ScreenManager Pro
for LCD (DDC/CI)" allows you to
perform the color adjustment by using
the mouse and keyboard of your PC.
The adjusted status can be registered
or
as a color data and restore the data
later. (Refer to "Chapter 4 Color
Adjustment" on the User's Manual
for "ScreenManager Pro for LCD
(DDC/CI)".)
.
Chapter 2 Settings and Adjustments
19