Eizo FlexScan S1923 User Manual page 16

3
Perform the auto adjustment again with the analog screen
adjustment pattern displayed.
● To adjust flickering, screen position, and screen size
automatically [Screen]
(1) Display Pattern 1 of the "Screen adjustment pattern files" in full
screen on the monitor.
(2) Choose <Screen> from the <Auto Adjustment> menu, and press
.
The <Screen> menu appears.
(3) Select "Execute" with
Flickering, screen position, and screen size are corrected by the auto-
adjustment function.
If the screen is not displayed correctly even after adjusting in
step 3 above, perform the adjustments according to the
procedures on the following pages. When the screen is
displayed correctly, go to step 5
automatically [Range]" (page
4
Perform advanced adjustments for the following using the
<Screen> menu of the Adjustment menu.
Adjust the clock, phase and position, in this order.
● To eliminate vertical bars [Clock]
(1) Choose <Clock> from the <Screen> menu, and press
The <Clock> menu appears.
(2) Adjust the clock with
The adjustment is completed.
● To remove flickering or blurring [Phase]
Adjustable range: 0 to 63
(1) Choose <Phase> from the <Screen> menu, and press
The <Phase> menu appears.
(2) Adjust the phase with
The adjustment is completed.
16
Chapter 2 Settings and Adjustments
or , and press .
"● To adjust color gradation
17).
or , and press .
or , and press .
NOTE
• Press the control button slowly so as
not to miss the adjustment point.
• When blurring, flickering or bars
appear on the screen after adjustment,
proceed to
.
blurring [Phase]" (page 16)
flickering or blurring.
Attention
• Flickering or blurring may not be
.
eliminated depending on your PC or
graphics board.
NOTE
• When vertical bars appear on the
screen after adjustment, go back to
"● To eliminate vertical bars [Clock]"
(page 16). (Clock → Phase → Position)
"● To remove flickering or
to remove