10. Set the console assembly on the Left and Right
Handrails (84, 85). Make sure that no wires
are pinched. Insert the excess Upright Wire (81)
into the Right Handrail.
Attach the console assembly to the brackets on
the Handrails (84, 85) with two 5/16" x 1" Screws
(5) and two 5/16" Star Washers (11). Start both
Screws, and then tighten them.
11. Attach the two Console Clamps (92) to the con-
sole assembly with four #8 x 3/4" Screws (2).
See step 8. Tighten the four 1/4" x 1" Screws (4).
10
81
85
11
5
11
13
Console
Assembly
84
11
5
Console
Assembly
92
2