NordicTrack 831.24996.0 User Manual
  1. Manuals
  2. Brands
  3. NordicTrack Manuals
  4. Treadmill
  5. 831.24996.0
  6. User manual

NordicTrack 831.24996.0 User Manual

T6.3
Hide thumbs Also See for 831.24996.0:
Table of Contents

Advertisement

Quick Links

www.nordictrack.com
Model No. 831.24996.0
Serial No.
Write the serial number in the space
above for reference.
Serial
Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today, go
to www.nordictrackservice.com/
registration.
CUSTOMER CARE
For service at any time, go to
www.nordictrackservice.com.
Or call 1-800-TO-BE-FIT
(1-800-862-3348)
Mon.––Fri. 6 a.m.––6 p.m. MT
Sat. 8 a.m.––4 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER’'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for NordicTrack 831.24996.0

Summary of Contents for NordicTrack 831.24996.0

  • Page 1 Model No. 831.24996.0 USER’’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.nordictrackservice.com/ registration. CUSTOMER CARE For service at any time, go to www.nordictrackservice.com.

  • Page 2: Table Of Contents

    Apply the decal in the location shown. Note: The decals may not be shown at actual size. NORDICTRACK is a registered trademark of ICON IP, Inc.

  • Page 3: Important Precautions

    16. To purchase a surge suppressor, see your local 4. The treadmill is intended for home use only. NORDICTRACK dealer, call the telephone Do not use the treadmill in any commercial, number on the front cover of this manual, or rental, or institutional setting.
  • Page 4 20. The heart rate monitor is not a medical 24. Do not change the incline of the treadmill by device. Various factors, including the user’’s placing objects under the treadmill. movement, may affect the accuracy of heart rate readings. The heart rate monitor is 25.
  • Page 5 STANDARD SERVICE PLANS...

  • Page 6: Before You Begin

    BEFORE YOU BEGIN Thank you for selecting the new NORDICTRACK ® manual. To help us assist you, note the product model T 6.3 treadmill. The T 6.3 treadmill provides an impres- number and serial number before contacting us. The sive selection of features designed to make your model number and the location of the serial number workouts at home more effective and enjoyable.

  • Page 7: Part Identification Chart

    PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.

  • Page 8: Assembly

    ASSEMBLY •• Assembly requires two persons. •• To identify small parts, see page 7. •• Place all parts in a cleared area and remove the •• Assembly requires the following tools: packing materials. Do not dispose of the packing the included hex keys materials until you ...
  • Page 9 2. Make sure that the power cord is unplugged. Wire Press a Base Cap (74) into each side of the Base (94). Identify the Right Upright (90). Have a second person hold the Right Upright near the Base (94). See the inset drawing. Tie the wire tie in the Right Upright (90) securely around the end of the Wire Upright Wire (81).
  • Page 10 4. Hold the Right Upright (90) against the Base (94). Be careful not to pinch the wires. Partially tighten three 3/8" x 4" Screws (7) with three 3/8" Star Washers (13) into the Right Upright and the Base; do not fully tighten the Screws yet.
  • Page 11 6. If there is a wire in the Left Handrail, remove and discard it. Identify the Right Handrail (85). Hold the Right Handrail near the Right Upright (90). Insert the Wire wire tie on the Upright Wire (81) through the bottom and pull it out of the end of the Right Handrail as shown.
  • Page 12 8. Insert the Console Frame (18) into the Handrails (84, 85). Attach the Console Frame with four 1/4" x 1" Screws (4). Do not fully tighten the Screws yet. Make sure not to pinch the Upright Wire (81). Firmly tighten the four 3/8" x 3 1/2" Screws (28). 9.
  • Page 13 10. Set the console assembly on the Left and Right Handrails (84, 85). Make sure that no wires Console are pinched. Insert the excess Upright Wire (81) Assembly into the Right Handrail. Attach the console assembly to the brackets on the Handrails (84, 85) with two 5/16"...
  • Page 14 12. Identify the Right and Left Trays (27, 36). Orient the Trays as shown and attach each Tray with four #8 x 3/4" Screws (2). Start all of the Screws, and then tighten them. Be careful not to overtighten the Screws. 13.
  • Page 15 14. Firmly tighten all six 3/8" x 4" Screws (7). Then, slide the Left and Right Base Covers (82, 83) downward. 15. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic.

  • Page 16: Operation And Adjustment

    OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same damaged by sudden voltage changes in your home’’s...
  • Page 17 CONSOLE DIAGRAM FEATURES OF THE CONSOLE To turn on the power, see page 18. To use the man- ual mode, see page 18. To use an onboard workout, The treadmill console offers an impressive array of see page 20. To use the sound system, see page 21. features designed to make your workouts more effec- To use the information mode, see page 21.

  • Page 18: To Use The Manual Mode

    HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
  • Page 19 5. Follow your progress with the displays. 6. Measure your heart rate if desired. When you select the Before using the handgrip heart rate monitor, re- manual mode, a track move the sheets of plastic from the metal contacts representing 1/4 mile on the pulse bar.

  • Page 20: To Use An Onboard Workout

    HOW TO USE AN ONBOARD WORKOUT The workout will continue in this way until the last segment of the pro le  ashes in the display and the 1. Insert the key into the console. last segment ends. The walking belt will then slow to a stop.

  • Page 21: The Information Mode

    HOW TO USE THE SOUND SYSTEM The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While To play music or audio books through the console the demo mode is turned on, the console will function sound system while you exercise, plug a 3.5 mm male normally when you plug in the power cord, press the to 3.5 mm male audio cable (not included) into the jack...

  • Page 22: How To Fold And Move The Treadmill

    HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to zero before you fold the treadmill. Then, remove left.

  • Page 23: Troubleshooting

    TROUBLESHOOTING Most treadmill problems can be solved by follow- b. Make sure that the power cord is plugged in. If the ing the simple steps below. Find the symptom that power cord is plugged in, unplug it, wait for five applies, and follow the steps listed.
  • Page 24 Next, locate the Reed Switch (52) and the Magnet b. If the walking belt is overtightened, treadmill per- (50) on the left side of the Pulley (49). Turn the formance may decrease and the walking belt may Pulley until the Magnet is aligned with the Reed become damaged.
  • Page 25 SYMPTOM: The walking belt is off-center or slips b. If the walking belt slips when walked on,  rst when walked on remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller a. If the walking belt is off-center,  rst remove the screws clockwise, 1/4 of a turn.

  • Page 26: Exercise Guidelines

    EXERCISE GUIDELINES Burning Fat——To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.

  • Page 27: Part List

    PART LIST Model No. 831.24996.0 R0813B Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Screw Reed Switch Clip #8 x 3/4" Screw Reed Switch Base Pad 1/4" x 1 1/2" Screw 1/4" x 1" Screw Drive Motor 5/16"...

  • Page 28: Exploded Drawing

    EXPLODED DRAWING A Model No. 831.24996.0 R0813B...
  • Page 29 EXPLODED DRAWING B Model No. 831.24996.0 R0813B...
  • Page 30 EXPLODED DRAWING C Model No. 831.24996.0 R0813B...
  • Page 31 EXPLODED DRAWING D Model No. 831.24996.0 R0813B...

  • Page 32: Ordering Replacement Parts

    ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: •• the model number and serial number of the product (see the front cover of this manual) ••...

This manual is also suitable for:

T 6.3

Table of Contents