8. Insert the Console Frame (18) into the Handrails
(84, 85). Attach the Console Frame with four
1/4" x 1" Screws (4). Do not fully tighten the
Screws yet. Make sure not to pinch the
Upright Wire (81).
Firmly tighten the four 3/8" x 3 1/2" Screws (28).
9. With the help of a second person, hold the con-
sole assembly near the Right Handrail (85) and
the Left Handrail (not shown).
Connect the Upright Wire (81) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.
8
28
4
84
9
Console
Assembly
Console
Wire
Wire
Tie
12
18
28
85
81
Console
Wire
85
81
81
4