User Manual of VC-230/230N
5.6.2 VDSL Configuration
The VDSL Router provides two VDSL operation modes for applications. Users can select the CO and CPE
mode manually.
For CPE mode, the router works as a VDSL client device, the VDSL connection is based on the CO side;
users don't need to configure any VDSL settings in this mode.
For CO mode, the router works as a VDSL CO device such as VDSL DSLAM or Switch, you can configure
the VDSL basic parameters for your VDSL connection.
CPE Mode
The VDSL Router default is CPE mode, in this mode, all VDSL parameters will be blocked and users don't
need to configure it. Just connect to CO device for VDSL connection.
75