Basic Settings - Planet VC-230 User Manual

Basic Settings

Object
MAC/IP/Port Filtering
Default Policy
MAC/IP/Port Filter Settings
Object
Source MAC address
Dest IP Address
Source IP Address
Protocol
Destination Port Range
Source Port Range
Action
Comment
Current MAC/IP/Port Filtering Rules in System
If you want to delete some rules in the table above, select the rules, and then click Delete Selected. Otherwise,
click Reset.
Enable or disable the MAC/IP/Port filtering function.
The Packet that does not match any rules would be dropped or
accepted.
Enter the MAC address that matches the source address of the packet
(optional).
Enter the IP address that matches the destination address of the
packet (optional).
Enter the IP address that matches the source address of the packet
(optional).
There are 4 options, including none, TCP, UDP and ICMP.
After setting a valid protocol, you may enter the UPD or TCP
destination port range.
After setting a valid protocol, you may enter the UPD or TCP source
port range.
Select Drop or Accept in the drop down list.
Add description for this rule.
The maximum rule number you can add is 32.
64
User Manual of VC-230/230N
Description
Description