Table of Contents
Advertisement
DHCP Type
Start IP Address
End IP Address
Subnet Mask
Primary DNS Server
Secondary DNS Server The secondary DNS server address.
Default Gateway
Lease Time
Statically Assigned
802.1d Spanning Tree
LLTD
IGMP Proxy
UPNP
Router Advertisement
PPPoE Relay
DNS Proxy
5.2.3 DHCP clients
You can view the information about DHCP clients on the page.
Disable: Disable DHCP server on LAN side.
Server: Enable DHCP server on LAN side.
Fill in the start IP address to allocate a range of IP addresses; client
with DHCP function set will be assigned an IP address from the range.
Fill in the end IP address to allocate a range of IP addresses; client with
DHCP function set will be assigned an IP address from the range.
The subnet mask of dynamic IP.
The primary DNS server address.
Fill in the default gateway for LAN interfaces out going data packets.
Fill in the lease time of DHCP server function.
Assign IP to the assigned MAC address. Enter the assigned MAC
address and IP in the corresponding fields.
Select enable or disable the IEEE 802.1d Spanning Tree function from
pull-down menu.
Select enable or disable the Link Layer Topology Discover function
from pull-down menu.
Select enable or disable the IGMP proxy function from pull-down menu.
Select enable or disable the UPnP protocol from pull-down menu.
You can select Enable or Disable.
You can select Enable or Disable.
Select enable or disable the DNS Proxy function from pull-down menu.
48
User Manual of VC-230/230N
Advertisement
Table of Contents
