Ricoh Priport 1250 Operating Instructions Manual page 84

SilverV-gb.book Page 64 Monday, May 15, 2000 3:32 PM
Service Program Mode
SP No. Mode
120 User Code Mode
3
121 UC Count
122 Clear UC Count
123 Total UC Count
124 Clear Total UC
Count
125 Auto Energy Saving You can set the time until the Energy Saver mode
64
Function
Selects user code mode. When you set this function,
you have to also specify the auto reset time. For de-
tails about user code mode, see ⇒ P.66 "User Codes".
Note
Default:
• User Code mode: 0
• Auto Reset time: 0
Adjustment value:
• User Code mode: 0: No 1: Yes
• Auto Reset time: 0: No, 1 – 5 minutes
Displays the number of masters and prints made in
each user code.
Note
M: Number of masters
P: Number of prints
Clear each user code counter.
Note
Default: 0
Adjustment value: 0: No 1: Yes
Display the total number of masters and prints for all
the 20 user codes.
Note
M: Number of masters
P: Number of prints
Clear the total user code counter.
Note
Default: 0
Adjustment value: 0: No 1: Yes
starts.
Note
Default: 3 Min. (minutes)
Adjustment value: 0: No, 1 – 120: Min