Ricoh Priport 1250 Operating Instructions Manual page 26

SilverV-gb.book Page 6 Monday, May 15, 2000 3:32 PM
Operation
E
Press the { { { { Proof} } } } key and check
the image density and the image
position of the proof print.
1
Note
If the image position is not cor-
rect, adjust it using the {Image
Position} keys or the fine adjust-
ment dial. See ⇒ P.9 "Adjusting
the Print Image Position".
If the image density is slightly
dark or light, adjust the image
density using the {W W W W } or {V V V V }
key. See ⇒ P.11 "Adjusting the
Print Image Density".
F
Enter the number of prints re-
quired with the number keys.
Note
Up to 9999 prints can be entered
at one time.
To change the number entered,
press the {Clear/Stop} key and
enter the new number.
6
G
Press the { { { { Print} } } } key.
Note
TSLS013E
After printing is completed, the
same number of prints is auto-
matically set for the next job.
To stop the machine during the
multi-print run, press the {Clear/
Stop} key.
To return the machine to the in-
itial condition after printing,
press the {Clear Modes/Energy
Saver} key.
TSLS011E
TSLS014E