Ricoh Priport 1250 Operating Instructions Manual page 15

SilverV-gb.book Page xi Monday, May 15, 2000 3:32 PM
14. { { { { Fine} } } } key
Press to select the fine image. See ⇒ P.13
"Fine Mode—Making Clear Prints".
{ { { { Image Position} } } } key
15.
Press to shift the image forwards or back-
wards. See ⇒ P.9 "Adjusting the Print Image
Position".
16. { { { { Program} } } } key
Press to input or recall user programs. See
⇒ P.38 "Program—Storing Your Print Set-
tings in Memory".
17. { { { { Clear Modes/Energy Saver} } } } key
• Clear Modes
Press to clear the previously entered job
settings.
• Energy Saver
Press to switch to and from Energy Sav-
er mode. ⇒ P.8 "Energy Saver Mode —
Saving Energy".
18. { { { { Auto Cycle} } } } key
Use to process the master and make prints
automatically. See ⇒ P.26 "Auto Cycle—
Printing from Several Originals at Once".
{ { { { Proof} } } } key
19.
Press to make proof prints.
20. { { { { W W W W } } } } and { { { { V V V V } } } } keys (Speed keys)
Press to adjust the printing speed. See ⇒
P.14 "Changing the Printing Speed".
{ { { { Memory/Class} } } } key
21.
Press to select Memory or Class mode. See
⇒ P.28 "Class Mode—Group Printing from
the Same Original"or ⇒ P.30 "Memory
Mode—Group Printing from Different Origi-
nals".
22.
Number keys
Press to enter the desired number of prints
and data for selected modes.
{ { { { q q } } } } key
23. q q
Use to enter data in selected modes.
{ { { { Clear/Stop} } } } key
24.
While entering numbers, press to cancel a
number you have entered.
While copying, press to stop copying.
25. { { { { Start} } } } key
Press to make a master.
26. { { { { Print} } } } key
Press to start printing.
xi