Time Search; Event Search - Q-See QSD2216C16-250 User Manual

Table of Contents

6.8 TIME SEARCH

Move the cursor to Time Search, then press "ENTER" button. The time search window will appear

as illustrated below:

A red block during a time period means there is video at that time

Press left and right buttons to move the cursor among year, month, day, hour and minute. If you

select the year and press the "ENTER" button you can select month and then day and hour. Press

ADD and DEC button to modify the time. If you select the minute and that minute has a red block

then you can press the "ENTER" button to play the video from the time you selected.

Move the cursor to Event Search, then press the "ENTER" button. The event search window will

appear as shown below:

There are four types of event lists: MOTION, ALARM, SCHEDULE and NETWORK. MOTION

means motion alarm recording, Alarm means sensor alarm recording, SCHEDULE means pre-set

Table of Contents