Controlling Your Tv - EchoStar HDS-600RS User Manual

Controlling your TV

The HDS-600RS remote control has a number of buttons that can be used to
control your TV. These are:
Volume up/down Mute TV On/Standby
To be able to use these buttons, your HDS-600RS remote needs to 'learn' the
appropriate codes from your TV's remote (you could also program the remote
with the appropriate control codes for your TV - see page 57).
To capture the control codes from your TV's remote control:
1. Position the HDS-600RS remote and the TV remote facing each other, on
a level surface, 10cm apart.
HDS-600RS remote
2. Press and hold down the ▼and OK keys together. The Main Menu button
will flash briefly and, after about 5s, will remain illuminated. Release the
▼and OK keys. The remote is now in its learning mode.
3. On the HDS-600RS remote, press the key you want to programme, for
example Volume +.
4. On the TV remote, press and hold the corresponding key (in this case,
Volume +). The Main Menu button flashes; when it stops release the
remote key.
5. The HDS-600RS remote has now learned the code for this function.
6. Repeat the procedure (from step 3) for the other keys you want to
programme.
7. When you have finished, press the OK key.
8. The Main Menu button will flash rapidly 10 times to confirm programming is
complete and return the remote to its normal mode.
TV
10cm
TV AV
TV source
TV remote
23