3. Getting Started
Before you switch on the power to your HDS-600RS, check the following:
Have you put batteries in the remote control (see page 11)?
Is the unit connected correctly (see page 10)?
Is the TV switched on?
Switching on for the First Time
Press
(On/Standby button) either on the remote or on the front of the unit.
Please be patient - the HDS-600RS may take up to a minute to initialise.
When you switch on your HDS-600RS for the first time, the Setup Wizard is
displayed. This will guide you through the process of setting up your satellite
signal and detecting freesat channels.
During this procedure, use the arrow keys (either on the remote or the front of
the unit) to highlight the option you want and press the OK button to select it.
Press OK to start the installation process.
15