Menu Preferences
Use this menu to change the appearance of text in the settings menus.
Transparency
Network Setup
This menu can be used to view and configure network settings. In most cases,
Auto Setup will correctly configure your network and internet connection via a
local DHCP server or DHCP-enable router. If you encounter any networking
problems, visit www.myechostar.com/support. It may be necessary to disable
Auto Setup to configure the connection manually. Unless this is the case, or
you are an experienced with network configurations, you are not
recommended to change this setting.
Auto Setup
Tip. For more information about this or any other the menu settings, visit
www.myechostar.com/support.
Power Options
Power-saving settings can be configured using this menu. Options allow you to
select the power consumption in standby mode.
Power Mode
Power saving mode
used when unit enters
standby:
Inactivity Standby
Solid (Menu background is opaque but clearer)
Low
Medium*
High (Menu backgrounds are fully transparent)
Enable*
Disable
Ultra low power mode
Lowest power consumption but the receiver will
take longer to switch to the active or ON state
(Sling features will not be available).
Normal low power mode*
In this mode, library functionality and Sling
features will be available.
Define time period before the receiver goes into
standby if no remote control or front panel keys are
operated:
Off, 4 Hours*, 5 Hours, 6 Hours
51