De-Registering Handsets; Locating A Handset ("Paging"); Changing The Base - Gigaset S810 User Manual

Using multiple handsets
1) On the handset
The handset is not registered to a base.
§Register§
Press the display key.
The handset is already registered to a base:
Ï
¢ ¢
v
Registration
¢
Register Handset
If the handset is already registered to four
bases:
s
Select base, e.g., Base 3 and
§OK§
press
~
If required, enter the system
PIN for the base and press
A message appears stating that the hand-
set is searching for a base that is ready for
registration.
2) On the base
Within 60 seconds press and hold the reg-
istration/paging key on the base
¢
( page 4) (approx. 3 seconds).
Registering other handsets
You can register other Gigaset handsets and
handsets for other devices with GAP func-
tionality as follows.
1) On the handset
Start to register the handset as described
in its user guide.
2) On the base
Press and hold the registration/paging key
¢
on the base ( page 4) (approx. 3 sec.).
62
.
§OK§

De-registering handsets

You can de-register any other registered
handset from any registered Gigaset S810H
handset.
Ï
¢ ¢
v
¢
De-reg. Handset
s
Select the internal subscriber
you wish to de-register and
press
(The handset you are currently
using is highlighted with <).
~
Enter the current system PIN
.
and press
§Yes§
Press the display key.

Locating a handset ("Paging")

You can locate your handset using the base.
¤
Briefly press the registration/paging key
on the base (
¤
All handsets will ring simultaneously
("paging"), even if the ringtones are deac-
tivated.
Ending paging
¤
Briefly press the registration/paging key
on the base or press the talk key c on
the handset.

Changing the base

If your handset is registered to more than
one base, you can set it to a particular base
or to the base that has the best reception
(Best Base).
Ï
¢ ¢
v
s
Select one of the registered
bases or Best Base and press
§Select§
Registration
§OK§
.
§Save§
.
¢
page 4).
¢
Registration Select Base
.