Activating/Deactivating Auto Answer; Changing The Speaker/Earpiece Volume; Setting A Handsfree Profile - Gigaset S810 User Manual

•
Activating/deactivating
auto answer
If you activate this function, when you
receive a call you can simply lift the handset
out of the base/charger without having to
press the talk key c.
Ï
¢ ¢
v
Telephony
§Change§
Press display key (³= on).
Changing the speaker/
earpiece volume
You can set the loudspeaker volume for
handsfree mode and the earpiece volume to
five different levels.
During a conversation via the earpiece or in
handsfree mode:
ø/ ÷
Press the side key to call up the
Handset Volume menu.
Change the volume by pressing
ø (louder) or ÷ (quieter).
or
t
Press the control key to call up
the Handset Volume menu. Set
the earpiece or speaker volume
by pressing r.
The setting will automatically be saved after
approximately 3 seconds, if not then press
§Save§
the display key .
If t is assigned to another function:
§Options§
Open menu.
Volume Select and press
Configure setting (see above).
Please note
u
The settings for the earpiece also
apply to a connected headset.
u
You can also set the call volume using
¢
the menu ( page 29).
¢
Auto Answer
§OK§
.

Setting a handsfree profile

You can set different handsfree profiles to
optimally adapt your phone to your environ-
ment.
Profile 1
The optimum setting for most connec-
tions and set as default.
Profile 2
Optimum volume in handsfree mode.
However, this means that the participants
cannot speak at the same time as the per-
son speaking is given preferential trans-
mission (making two-way conversations
difficult).
Profile 3
Optimises two-way conversations, both
callers can hear each other, even if they
talk at the same time.
Profile 4
Optimised for special connections. If the
default setting (profile 1) does not provide
optimum sound, please give this a try.
In idle status:
¢ Ï ¢
v
Audio Settings
¢
Handsfree Profiles
q
Select handsfree profile (1 to 4).
§Select§
Press the display key to save the
setting.
During a conversation:
§Options§
Open menu.
Handsfree Profiles
Select and press
q
Select handsfree profile (1 to 4).
§Select§
Press the display key to save the
setting.
Handset settings
§OK§
.
71