Table of Contents
Advertisement
Accepting a call
The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing talk key c.
Accept the call by:
¤
Pressing the talk key c.
¤
Pressing the handsfree key d.
¤
Gigaset S810: press the display key
§Accept§
.
¤
Gigaset S810A: press the display key
Ô
to divert the call to the answering
¢
machine (
page 54).
If the handset is in the base/charger and the
Auto Answer function is activated
¢
(
page 71), the handset automatically
answers the call when you remove it from
the base/charger.
To deactivate the ringtone, press the
display key. You can accept the call as long as
it is displayed on the screen.
Accepting a call on a Bluetooth
headset
Prerequisite: Bluetooth is activated; a con-
nection has been established between the
Bluetooth headset and the handset
¢
(
page 66).
Only press the talk key on the headset
when the headset rings; it can take up to
5 seconds.
The menu to set the earpiece and micro-
phone volume can be called up during a call
by pressing the side keys.
For further details about your headset, see
the accompanying user guide.
Calling Line Identification
When you receive a call, the caller's number
is displayed on the screen if the following
conditions are met:
u
Your network provider supports CLIP, CLI.
– CLI (Calling Line Identification): the
caller's number is transmitted.
– CLIP (Calling Line Identification Pres-
entation): the caller's number is dis-
played.
u
You have requested CLIP from your net-
work provider.
u
The caller has requested CLI from the net-
work provider.
Call display with CLIP/CLI
If the caller's number is saved in your direc-
§Silence§
tory, the number is replaced by the corre-
sponding directory entry (
and name/number). If you have assigned a
caller picture to that caller, this will also be
displayed.
Ø«Ú
ä
1234567890
Accept
Making calls
ä/ k/ l
symbol
Gigaset S810
1
2
3
Silence
31
Advertisement
Table of Contents
