Gigaset C330/330 A / CHN en/ A31008-M2307-Y101-1-7619 / HS_using.fm / 22.03.2013
Registering handsets
Manual registration of the Gigaset
C330H on Gigaset C330/330 A
If you want to register additional handsets.
you must activate manual registration of the
handset (1) on both the handset (2) and the
base.
When the registration process has com-
pleted successfully, the handset returns to
idle status. The handset's internal number is
shown in the display e.g. INT 1. If not, repeat
the procedure.
On the handset
If the handset is not registered to a base the
display shows:
Register your
handset
§OK§
Press locator
Key for 5 sec
§OK§
On the base
Within 60 seconds, press and hold the regis-
tration/paging key k (
approx. 5 seconds.
The speaker key (LED) ø flashes and you
will hear a beep.
OK
Press the display key to start the
registration.
OK
Press the display key to confirm.
¢
page 1) for
On the handset
~
Enter the current system PIN
§OK§
and press
A message indicates that the system is
searching for a base that is ready for registra-
tion.
Please note
If four handsets are already registered,
no additional handset can be registered
to the base. If the 5th handset intends to
register to the base, an error tone is out-
put and the display shows Memory Full.
De-registering handsets
You can de-register any other registered
handset from any registered Gigaset C330H
handset.
¢
¢
§§Menu§§
HS Setting
s
Select the internal subscriber
you wish to deregister and press
§OK§
.
~
Enter the current system PIN
§OK§
and press
§OK§
Press the display key to confirm
the action.
Using the handset
.
De-register HS
.
29