Table of Contents
Advertisement
Deactivating call screening for the
current recording
You can deactivate the function for your
own handset during the recording.
§Silence§
Press the display key.
•
Setting the recording
parameters
The answering machine has already been
preset at the factory. Individual settings can
be adjusted using the handset.
¢
¢
v
Ì
Recordings
¤
You can enter data in the following fields:
Length:
Select maximum recording time 1 min.,
2 min., 3 min. or Maximum.
Quality:
Select Long Play or Excellent recording
quality. If the quality is higher, the maxi-
mum recording time is reduced.
Ring Delay:
Select when the answering machine
should accept a call:
Immediately, after 10 sec., 18 sec.,
30 sec. or Automatic.
§Save§
Press the display key.
Information about ring delay
In Automatic mode, the following applies
for ring delay:
u
If there are no new messages, the answer-
ing machine answers a call after
18 seconds.
u
If there are new messages, the answering
machine answers a call after 10 seconds.
When operating remotely (
can tell after approx. 15 seconds that there
are no new messages (otherwise the
answering machine would have already
accepted your call). There are no call charges
if you hang up now.
Operating the Gigaset S810A base answering machine
¢
page 56), you
Please note:
You can configure your telephone so that
the first ring is suppressed on all calls
¢
(
page 44). This means that the time
selected for the ring delay predetermines
how long the caller must wait before the
answering machine accepts the call.
Changing the language for voice
prompt and pre-recorded
announcement
v
Open the main menu.
*#Q5#2
Enter digits and press
Q
§OK§
To set English.
§OK§
To set French.
2
§OK§
To set Arabian.
•
Resetting fast access for
the answering machine using
key 1
By default, key
has been assigned for
fast access to the integrated answering
machine. However, if you have set the net-
work mailbox for fast access (
you can reset this setting.
¢
¢
v
Ì
Set Key 1
Answ. Machine
Select and press
Once you have selected the answering
machine, press and hold key
. You are
connected directly.
The setting for fast access applies to all regis-
tered handsets.
¢
page 57),
§OK§
.
55
Advertisement
Table of Contents
