General Maintenance; T Echnical I Nformation - Chauvet Scorpion User Manual

5. T
ECHNICAL

General Maintenance

4
Page 22 of 68
I
NFORMATION
Dust build up reduces light output performance and can cause overheating. This can
lead to reduction of the light source's life and mechanical wear. To maintain optimum
performance and minimize wear, you should clean your lighting fixtures at least twice a
month. However, be aware that usage and environmental conditions could be
contributing factors to increase the cleaning frequency
DO NOT open this fixture for cleaning or servicing.
To clean this lighting fixture, follow the instructions below:
•
Unplug the fixture from power.
•
Wait until the fixture is cold.
•
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface and fan vents.
•
Clean all external glass surfaces with a mild solution of glass cleaner or isopropyl
alcohol.
•
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue,
and drag any dirt or grime to the outside of the glass.
•
Gently polish the external glass surfaces until they are free of haze and lint.
Always dry the external glass surfaces carefully after cleaning them.
Refrain from spinning the fan using compressed air because you could damage it.
Scorpion™ GBC EU/RBM EU/RGY EU/BLU EU User Manual (Rev. 5 ML)