Vlan Tagging - Gigaset DE310 User Manual

VLAN tagging

A local network can be divided into logical subnetworks, so-called VLANs (Virtual Local Area
Network, standard IEEE 802.1Q). Multiple VLANs share a physical network and its compo-
nents, e.g., switches. Data packets of a VLAN are not forwarded to another VLAN. VLANs are
often used to separate the data traffic of different services (Internet telephony, Internet TV, ...)
and to define different priorities for the data traffic.
You can operate your phone and a PC connected to your phone's PC port in two different
VLANs. You enter the VLAN identifiers (VLAN tag) here, which you get from your network
operator.
Warning
u
If you operate the PC and the phone in different VLANs, you can no longer access the
phone's Web configurator directly from the PC.
u
If you enter an incorrect value here, you must reset the phone to its default settings
£
( page 60). After this you must re-establish phone access to the local network.
‰
¢ ¢
Settings
VLAN Settings
Back
VLAN Tagging:
LAN Port only
Back
VLAN Identifier:
1024
Back
Local Network
OK
OK
OK
Configuring settings for the local network
s
Select VLAN Settings.
§§OK§§
Press the display key to confirm the selec-
r
tion.
Select the required setting:
No If you do not use VLAN (default).
LAN Port only
If you operate the phone and the PC within
the same VLAN.
LAN and PC Port
If you operate the phone and the PC within
different VLANs.
§§OK§§
Press the display key to confirm the selec-
tion.
~
Enter the VLAN Identifier and confirm with
§§OK§§
.
r
Value range: 1 – 4094
Define the priority for the different services
and confirm with
Values: 1 – 7
§§OK§§
Press the display key to confirm the set-
tings.
§§OK§§
.
65