Ring Tones - Gigaset DE310 User Manual

Configuring phone settings via the Web configurator
G.726 Good voice quality (inferior to that with G.711 but better than with G.729). Your
phone supports G.726 with a transmission rate of
32 kbit/s per voice connection.
iLbc Average voice quality. This codec works with 30-ms or 20-ms blocks. The data rate
is 13.33 kbit/s (30-ms blocks) or 15.2 kbit/s (20-ms blocks).
G.729A Average voice quality. The necessary bandwidth is less than or equal to
8 kbit/s per voice connection.
Silence suppression
Silence suppression means that no data packets are sent during a pause in speaking. This
means a lower data volume but call participants may interpret it as an interruption to the con-
nection.
¤
Select No if you do not want silence suppression. The default setting is Yes.
Saving settings
¤
Click on Save to save your settings on the screen.

Ring tones

Only available in user mode. In administrator mode you set the ring tones when configuring
£
the connection (
You can set an individual ring tone for each configured VoIP connection.
¢
Settings Telephony
An entry exists for each VoIP connection.
¤
Select a Melody form the list.
¤
Click on Test to play back the selected melody.
Saving settings
¤
Click on Save to save your settings on the screen.
Please note
You can upload further ring tones from the PC to your telephone (
90
page 88).
¢
Ring Tones
£
page 108).