Keys; Connecting A Headset; Setting Up The Device (For The First Time) - Gigaset DE310 User Manual

Connecting a headset

You can connect a headset via the RJ9 connector of your Gigaset DE310 IP PRO.
¤
Connect the cable for the headset to the RJ9 connector on the phone.

Setting up the device (for the first time)

Your device will start automatically as soon as it is connected to the mains power supply.
Please be aware that the device is powered by PoE (Power over Ethernet). This means that it
is supplied with power as soon as it is connected to an Ethernet switch with PoE-functionality.
The first time you use the device, an installation wizard will start automatically and guide you
through the necessary installation steps.
Configuring language and time zone settings
Select your Language
Deutsch
¤
OK
¤
Use the navigation key to select the
required language. To do this, press up or
down on the navigation key
Further information about the navigation
key can be found on
Press the display key under
your selection.
You can also use the OK function on the
navigation key (by pressing
tre of the key).
First steps
q
.
£
page 23.
§OK§
to confirm
‰
in the cen-
17