Appliance Setup; Remove Fixed Glass Assembly; Remove The Shipping Materials; Clean The Appliance - Heatilator RAVE4013I-C Owner's Manual

14 14

Appliance Setup

A. Remove Fixed Glass Assembly
See Section 14.E.
B. Remove the Shipping Materials
Remove shipping materials from inside or underneath the
fi rebox. The manual bag assembly is also shipped under-
neath the fi rebox.
C. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated
inside the fi rebox or underneath in the control cavity.
D. Accessories
Install approved accessories per instructions included
with accessories. Contact your dealer for a list of ap-
proved

accessories.

WARNING! Risk of Fire and Electric Shock! Use ONLY
Hearth & Home Technologies-approved optional acces-
sories with this appliance. Using non-listed accessories
could result in a safety hazard and will void the warranty.
Glass Rock Media Kit
A factory-installed glass rock media placement jig has
been provided with this appliance. If the glass rock media
accessory will not be installed, remove the jig during the
setup process. The jig is shown in Figure 14.1.
ROCK MEDIA
PLACEMENT JIG
Figure 14.1. Glass Rock Media Jig Location
Heatilator • RAVE4013I-C • 2293-900 Rev. i • 4/14 57