Symbology Identifier; Telepen; Timeout Between Different Consecutive Codes - Intermec SF51 User Manual

Chapter 4 — Configuration Command Reference

Symbology Identifier

Symbology identifiers allow you to indicate what type of data is
being sent by prepending an identifier to the data. You can
prepend one of the following types of character strings to
identify which symbology the data is using.
Symbology Identifier Options
Character
String Description
AIM ISO/IEC The AIM Standard for symbology identifiers
standard consists of a three-character structure indicating
the symbology and the optional features of the
symbology. For more information about the AIM
Standard for symbology identifiers, refer to the
AIM ISO/IEC Standard.
User-defined The user-defined symbology identifier is one to
ASCII four ASCII characters in length. You can configure
character string user-defined symbology identifiers to assign
custom identifier strings to the bar code
symbologies.

Telepen

Enables or disables decoding of Telepen symbology. Telepen is
the only symbology to directly represent the full ASCII character
set without shift characters. It is extremely secure as it has
negligible risk of misreads and has a double density numeric
only mode.

Timeout Between Different Consecutive Codes

Use this command to invalidate a second bar code read that
occurs before the timeout expires. Use this command when
scanning bar codes that contain different data as opposed to the
Timeout Between Identical Consecutive Codes command that
you use when your bar codes contain identical data.
You can set Timeout Between Different Consecutive Codes to a
value from 0 to 2550 ms.
SF51 Cordless Scanner User's Guide 45