Using Vibrate Alert - Intermec SF51 User Manual

You can change the beep volume for your needs and
environment. You can set the beep volume to Low (quiet),
Medium (loud), and High (very loud - default).
Note: To turn off the beeper, you set the Beep
Duration to 0. Turning off the beeper does not
affect the beeps associated with Bluetooth
Connect/Disconnect or Bluetooth Device Page.
You can also change the beeper duration and beeper frequency.
For more information about the beeper commands, see
Chapter 4, "Configuration Command Reference."

Using Vibrate Alert

You can configure the SF51 to vibrate when a bar code is
successfully decoded. This feature can be useful in these
situations:
• You are in a noisy environment, such as a busy warehouse,
where it can be difficult to hear the beep.
• You are working in a quiet environment, such as a library,
where you do not want to make a lot of noise.
To turn on vibrate alert
• Scan this bar code:
Turn On Vibrate Alert
\60\03\10\48\00\02\40
To turn off vibrate alert
• Scan this bar code:
Turn Off Vibrate Alert
\60\03\10\48\00\00\00
SF51 Cordless Scanner User's Guide
Chapter 1 — Using the SF51
7