Using Configuration Commands - Intermec SF51 User Manual

Cordless scanner

Hide thumbs Also See for SF51:

Table of Contents

Enlarged version

Chapter 4 — Configuration Command Reference

Using Configuration Commands

A configuration command changes the way the SF51 operates.

For example, you can change the Beep Volume and make the

SF51 beeper very quiet for a quiet environment.

You can configure the SF51:

• using EasySet online. Send commands to your SF51 from

your PC using EasySet. For help, see the procedure "To

configure the SF51 online with EasySet" on page 12.

• using EasySet offline. Send commands to a bar code setup

sheet. Then, scan the bar codes onscreen with your SF51, or

print the setup sheet and scan the bar codes. You do not need

a Bluetooth connection to use this method. For help, see the

procedure "To configure the SF51 offline with EasySet" on

page 13.

• from your Intermec computer. Send commands to your SF51

from your Intermec computer using Intermec Settings. For

help, see the procedure "To configure the SF51 from your

Intermec computer" on page 14.

Note: When you connect to an Intermec computer,

all SF51 settings that are common to the Intermec

computer's internal scanner settings are changed to

the default settings of the internal scanner.

For a list of all the commands and their default values as they are

organized in EasySet, see the next section, "Configuration

Commands By Function."

For descriptions of each command organized alphabetically, see

"SF51 Configuration Commands" on page 36.

SF51 Cordless Scanner User's Guide

Table of Contents