Configuring The Discoverable State Of The Sf51; Connecting The Sf51 To A Host Device - Intermec SF51 User Manual

Chapter 2 — Configuring and Managing the SF51
Note: For security reasons, you can only change
the Bluetooth PIN by scanning a bar code.

Configuring the Discoverable State of the SF51

By default, the SF51 is always discoverable. For enhanced
security, you should configure your SF51 for limited
discoverability, which allows the SF51 to be discoverable by
Bluetooth management applications for only 30 seconds. For
more information, see "Bluetooth Discoverable" on page 38.
To configure your SF51 for limited discoverability
• Scan this bar code:
Bluetooth parameters - discoverable - limited
\60\02\50\41\00\02\40
The SF51 is discoverable for 30 seconds.

Connecting the SF51 to a Host Device

You can use Bluetooth radio communications to connect the
SF51 to these host devices:
• Intermec computer with a Bluetooth radio, such as the 700
Color Series (with Windows Mobile 2003 or later), CK30,
and CK60
• PC with a USB Bluetooth adapter (P/N 074892)
• Other devices with a Bluetooth radio that support a Serial
Port Profile (SPP)
Before connecting the SF51 to a host device, note the Bluetooth
address for the:
• host Bluetooth device.
• SF51.
16 SF51 Cordless Scanner User's Guide