Code 93/93I; Code 128 / Ean 128; Configuration Modes And Utilities - Intermec SF51 User Manual

Chapter 4 — Configuration Command Reference

Code 93/93i

Enables or disables decoding of Code 93/93i symbology. Code
93/93i is a variable length, continuous symbology that uses four
element widths.

Code 128 / EAN 128

Enables or disables decoding of Code 128 / EAN 128
symbology. Code 128 is a very high-density alphanumeric
symbology that supports the extended ASCII character set. It is a
variable length, continuous code that uses multiple element
widths.
ISBT 128
Enables and configures decoding of ISBT Code 128 symbology.
ISBT Code 128 is the global bar code labeling standard for the
blood banking industry. It is used to support the worldwide
distribution, tracking, and handling of blood bags and blood
components.
GTIN Processing for EAN 128
With GTIN processing enabled, a GTIN compliant EAN 128
label will have the first two digits stripped and output 14 digits.
A GTIN (Global Trade Item Number) compliant EAN 128
label:
• is 16 digits long.
• has "01" as the first two digits of the label.

Configuration Modes and Utilities

Use Configuration Modes and Utilities to:
• allow the SF51 to always accept configuration commands by
scanning bar codes or to timeout 1 minute after the last
configuration command is set by scanning a bar code.
• get the product version, sub-system versions, and Bluetooth
address of your SF51.
• page the SF51 from your host PC or turn off the SF51.
For more information and bar codes, see "Getting Information
About Your SF51" on page 24.
40 SF51 Cordless Scanner User's Guide