Xerox TF4025.4075 User Manual page 84

General Information
The time and date flash on the display.
Problems when Faxing or Printing
Faxes sent are of poor quality.
The device produces black lines when send-
ing or printing.
Copy is blank.
Printing is interrupted.
No printing
Documents are not properly fed.
Problems with the Connection
The device rings once, remains silent for a
short while and starts ringing again.
No dial tone
84 ¦ Service · Power Cycling
You must check the time and date after a
short power failure. Confirm with OK.
Change the resolution from
STANDARD RESOL.: FINE
to
SOL.: PHOTO
.
Change the contrast.
Clean the scanner and the document feed
slot.
Test the device by making a copy of the doc-
ument. If the device is in order, the device of
the recipient might be defective.
Clean the scanner and the document feed
slot.
Insert the documents face up into the docu-
ment feeder.
Paper or document jam, no paper or ink film.
Follow the instructions on the display and in
the error report.
There could be a small pause after printing
several pages. The device continues printing
automatically.
Check if you have inserted clamped paper
correctly. The lever on the right hand side
next to the paper feeder must be folded
backwards.
Clean the scanner and the document feed
slot.
This is absolutely normal. The fax switch
checks the call after the first ring. If it is a
voice call, the device continues to ring.
Check the installation of the device. Connect
the telephone cable to the socket marked
LINE. Insert the telephone plug into your
PTT line socket.
RESOL.:
RE-
or