Table of Contents
Advertisement
PPR
EMULATION
ITEM
CHARACTER PITCH
CHARACTER SET
SYMBOL SET
LETTER 0 STYLE
ZERO CHARACTER
LINE PITCH
WHITE PAGE SKIP
CR FUNCTION
LF FUNCTION
LINE LENGTH
FORM LENGTH
TOF POSITION
LEFT MARGIN
FIT TO LETTER
VALUE
10CPI; 12CPI; 17CPI;
20CPI; PROPORTIONAL
Set 1; Set 2
IBM 437
Disable; Enable
Normal; Slashed
6 LPI; 8 LPI
OFF; ON
CR; CR+LF
LF; LF+CR
80 COL; 136 COL
11in; 11.7in; 12in
0.0in – 1.0in
0.0in – 1.0in
Disable; Enable
C7350 User's Guide > 54
DESCRIPTION
Specifies character
pitch in this emulation.
Specifies a character
set.
Specifies a symbol set.
Specifies the style that
replaces 9BH with letter
o and 9DH with a zero
Sets the zero to be
slashed or unslashed.
Specifies the line
spacing.
Specifies whether or not
the printer ejects a
blank sheet.
Not available on duplex
operation.
Sets functionality on
receipt of CR code.
Sets functionality on
receipt of LF code.
Specifies the number of
characters per line.
Specifies the length of
paper.
Specifies the distance of
print from the top edge
of the paper.
Specifies the distance of
print from the left hand
edge of the paper.
Sets the printing mode
that can fit print data,
equivalent to 11 inches
(66 lines), in the
LETTER-size printable
area.
Advertisement
Table of Contents
