Table of Contents
Advertisement
4.
If the memory modules are of the same capacity, the
order of SDRAM slots to use is Slot 1, Slot 3, and Slot 2.
(a)
If the memory modules are of different part number/
capacity, insert the highest module into Slot 1, the
second highest into Slot 3 and the lowest into Slot 2.
(b)
Replace the mother board and secure it with the two
screws.
5.
Reconnect the printer interface cable and power cable,
then switch on the printer.
NOTE
If the error message SERVICE CALL/034 appears on the LCD
after switching the printer on, make sure the memory modules
have been installed correctly.
6.
Print a Menu Map as follows to confirm the additional
memory is correctly installed.
(a)
Press the Menu button twice to access the
INFORMATION MENU.
(b)
Press the Select button and confirm that PRINT
MENU MAP is displayed on the LCD.
(c)
Press the Select button to print the menu map.
(d)
Check that the Total Memory Size is the same as the
memory now installed in the printer.
C7350 User's Guide > 167
Advertisement
Table of Contents
