Colour Menu - Oki C7350 Series User Manual

C
OLOUR MENU
ITEM
AUTO DENSITY MODE
ADJUST DENSITY
COLOUR TUNING
VALUE
Auto; Manual
Execute
Print pattern
C7350 User's Guide > 47
DESCRIPTION
Select whether density
adjustment and Toner
Response Curve (TRC)
compensation is
automatic.
Auto: Density
adjustment is
automatically run under
specified conditions,
and reflected in the TRC
compensation.
Manual: The printer
does not voluntarily run
density adjustment.
If EXECUTE is selected,
the printer will
immediately adjust
density and reflect it in
the TRC compensation.
Density adjustment
must be executed when
the printer is idling. It
may become invalid if
executed in any other
state.
Prints the pattern for
the user to adjust TRC.
Ordinarily this function
is not needed because
TRC is automatically
adjusted to the
recommended levels
through density
adjustment and TRC
compensation. This
function permits TRC
adjustment to your
requirement by using
the adjustment menu of
HIGHLIGHT, MID-TONE,
and DARK for each of
CMYK. Adjustment
results will be reflected
as offset values
(addition) to the
corrections made
through the Adjust
Density/TRC
Compensation function.