Table of Contents
Advertisement
The fuser unit is very hot after printing. Always use the
handle when lifting it.
2.
Move the two locking levers (1) to the rear of the machine
to release the fuser unit.
3.
Using the handle (2), remove the fuser unit from the
printer.
4.
Remove the new fuser unit from its packaging.
5.
Using the handle (2), install the new fuser unit into the
printer.
6.
Make sure the two spring loaded locking levers (1) lock
the fuser unit into place.
7.
Remove the retaining tape from the coloured, spring
loaded lever (3) on top of the fuser unit.
8.
Close the top cover.
WARNING!
C7350 User's Guide> 139
Advertisement
Table of Contents
