SECTION 5—MAINTENANCE AND TROUBLESHOOTING
Service Indicator Error Codes
NUMBER OF FLASHES
1
2
3
4
5
6
7
8
9
Lynx™L-3 & Lynx L-4
PROBLEM
Batteries need charging.
Low battery voltage.
Battery voltage too high.
Motor current error.
Brake release lever is disengaged.
Throttle control lever not in neutral. Turn the scooter power off, verify
Throttle control lever malfunction
or speed pot error.
Motor problems.
Other internal errors.
24
SOLUTION
Recharge the batteries. Refer to
Removing/Installing the Battery Box
on page 38.
Recharge the batteries before using.
Refer to Charging the Batteries on
page 41.
Check battery condition and
connections. Contact a qualified
technician to check your battery
charger.
Scooter has drawn too much
current. Verify there are no objects
blocking the tires.
Engage the brake release lever.
Refer to Engaging/Disengaging the
Brake Release Lever on page 29.
Turn the key off, then on to reset. If
this does not correct the problem,
contact a qualified technician.
the throttle control lever is in the
center position, and turn the power
back on. If this does not correct the
problem, contact a qualified
technician.
Contact a qualified technician.
Contact a qualified technician.
Contact a qualified technician.
Part No. 1143205