Customizing The Scanner Settings; Using A Button On The Scanner To Start Scanning; Index - Fujitsu fi-6110 Operator's Manual

Chapter 5 Various Ways to Scan

5.5 Customizing the Scanner Settings

Using a Button on the Scanner to Start Scanning

The [Scan/Stop] and [Send to] buttons on the operator panel
can be configured to perform scanning by simply pressing the
button.
To configure this setting, you first need to assign an
application to be launched for each button.
Computer setup
1
Confirm that the scanner is connected to your computer,
then power on the scanner.
For details, refer to "Connecting the Cables" in Getting Started.
2
Select the [Start] menu
The [Control Panel] dialog box appears.
3
Click the [Hardware and Sound] icon.
The [Hardware and Sound] dialog box appears.
4
Click the [Scanners and Cameras] icon.
The [Scanners and Cameras] dialog box appears.
5
Display the properties of the scanner.
Double-click the scanner icon.
[Control Panel].
6
Click the [Events] tab and select an event.
From the [Select an event] drop-down list, select an event from which
you want to launch an application.
In this function, the following events can be selected:
[Scan Button] (press the [Scan/Stop] button)
[Send to 1] to [Send to 9] (press the [Send to] button while a
number from 1 to 9 is displayed on the Function Number
Display)
TOP
Contents

Index

Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
78